MONITOR OLD FASHIONED HAND PUMP

Price: from $726.95 CAD + Cylinder ($726.95 USD)

The major components are as follows:

PUMP STAND

• available in three models, with adjustable strokes - 5", 7 1/2" or 10"
• operated by hand, windmill or pump jack

(32) MODEL 11HD

• Force Pump, discharges water out the spout or forces the water to another location (with optional hose adapter)

(33) MODEL 12HD

• Force Pump, same as Model 11HD except has a Bibb spout (with a shut off valve)

DROP PIPE (not included)

• connects the pump stand to the well cylinder and carries the water to the surface
• 1-1/4" I.D. galvanized steel or rigid PVC plastic - purchase locally

PUMP ROD (not included)

• located inside the drop pipe
• connects the pump handle to the plunger assembly in the cylinder
• 7/16" diameter galvanized steel or stainless steel, or use 3/8" galvanized pipe - purchase locally

WELL CYLINDER

• available in four sizes
• contains the plunger and valves, and is the actual pumping component that goes down the well. The up and down movement of the plunger (activated by the pump handle and pump rod) brings the water to the surface
  
• (35a)1 13/16" I.D. (2" OD.) Cylinder
  • used for depths up to 250 feet
• (35) 2" I.D. (2 1/4" OD.) Cylinder
  • used for depths up to 200 feet
• (36) 2 1/2" I.D. (2 3/4" OD.) Cylinder
  • used for depths up to 140 feet
• (37) 3" I.D. (3 1/4" OD.) Cylinder
  • used for depths up to 100 feet

Note: Water can be pumped from the above depths when the handle is set to the 5" stroke setting. The depth will be less when the stroke setting is 7 1/2" or 10".