Price: $299.45 CAD includes cylinder, 10 feet of drop pipe and pump rod
($299.45 USD)

PUMP STAND SPECIFICATIONS: (The component that sits above the well).

• Height: 24” (60 cm) and can be easily modified to suit

• Base Diameter: 7” (17.5 cm)

• Weight: 6 lbs (2.8 kg)

• Discharge Port: 1 1/2” I.D., includes 1 1/4” female pipe thread adapter (with vermin screen), and elbow with 1 1/4” female pipe thread

• Suction Port: 2” female pipe thread for drop pipe

• Pump Rod Size: 3/8” diameter with adapter to 1/2” rigid PVC plastic pipe (female pipe thread)

• Pump Stroke: 3 1/2” (9 cm)

• All fasteners and the upper pump rod are stainless steel

CYLINDER SPECIFICATIONS: (The component that goes down the well).

• Length: 26” (65 cm) including foot valve

• Outside Diameter: 4 3/8” (11 cm)

• Inside Diameter: 3” (7.5 cm)

• Weight: 5 lbs (2.6 kg)

• Pipe Size: 2” rigid PVC with female pipe thread

• Plunger Assy: Engineering Thermoplastic and stainless steel, with Polyester Elastomer molded cup

• Plunger Rod: 1/2” rigid PVC pipe with female pipe thread

• Cylinder Barrel: made of rigid PVC plastic

• Capacity: approximately 4 gpm at 50 strokes per minute

Click here for a larger view of cylinder.

MAJOR COMPONENTS

The major components of a complete installation are as follows:

(1) PUMP STAND

• The base is attached to a platform above the well casing (using 5/16” fasteners, 4 required and available locally)

• Has 2” female pipe thread to attach the drop pipe

• Has stainless steel upper rod with adapter to attach pump rod

(2) DROP PIPE (2” rigid PVC plastic)

• 2 Lengths 5’ long for a total of 10‘

• Connects the pump stand to the well cylinder and carries the water to the surface

(3) PUMP ROD (1/2” rigid PVC plastic) 2 Lengths 5’ and 4 ‘ long for a total of 9’

• Located inside the drop pipe and connects the pump handle to the plunger assembly in the cylinder

• This hollow pump rod actually floats and therefore reduces the pumping effort

(4) WELL CYLINDER (3” I.D., 4 3/8” OD) made of rigid PVC plastic, with 2” female pipe thread

• The actual pumping component that goes down the well

• The up and down movement of the plunger (activated by the pump handle and pump rod) brings the water to the surface

• Plunger has 1/2” female pipe thread to connect to the pump rod

• Has external foot valve

For a large line drawing of the Oasis Shallow Well Hand Pump click here.
(Must have Adobe Acrobat Reader.)

(5) INSERT ADAPTER (1 1/4” ) - 2 supplied

• 1 screws into bottom of the cylinder and 1 screws into the foot valve

• Used to attach 1 1/4” black poly pipe

(6) BLACK POLY PIPE (1 1/4” INSIDE DIAMETER ) - NOT INCLUDED

• Available locally from hardware store or plumbing supplier

• Goes from the bottom of the cylinder down into the water

• Must be long enough to reach 10 to 15 feet below the surface of the water if possible, keeping in mind the level may drop in the dry time of year

• Has the foot valve installed on the bottom

(7) FOOT VALVE (1 1/4”)

• Attaches to bottom of black poly pipe

• Is part of the pumping mechanism

• Must be at least 6” above bottom of well or cistern

(8) PLATFORM - NOT INCLUDED

• Can be fabricated from wood or steel and must be high enough to allow access to the well seal bolts

(9) WELL SEAL - NOT INCLUDED, BUT CAN BE ORDERED BY SPECIFIC SIZE

• Used to seal the top of the well casing where the drop pipe goes in

(10) WELL CASING - NOT INCLUDED

• Installed by a well driller, 6” is a common size, BUT MUST BE AT LEAST 5 “ TO ACCOMMODATE THE CYLINDER, OTHERWISE AN OPTIONAL SMALLER CYLINDER MUST BE USED, contact us for details

(11) STAINLESS STEEL HOSE CLAMPS (SIZE #20), 4 supplied

• Used to attach black poly pipe to insert adapters in cylinder and foot valve

For a larger view of image above, click here.