Guzzler 400HGK-3

  • Buy:

Has horizontal handle, connects to 1" I.D. hose using a clamp and has male garden hose thread on the inlet and outlet fittings, plus 3 foot hose for priming jet pumps.

Capacity: 38 litres per minute (8 G.P.M.) at 90 double strokes (up and down) per minute, 0 .42 liters (.09 gallons) per double stroke
Weight:
 .57 kilograms (1.25 lbs.)
Size: 25 cm. long (10") - 12.5 cm. wide (5") - 10 cm. high (4")

  • same as the Guzzler 400H except has male garden hose thread on inlet and outlet fittings
  • body made of injection molded DuPont Delrin
  • handle made of anodized aluminum
  • diaphragm and valves made of Buna-N, reinforced with Dacron (contact us for optional materials available).
  • fasteners made of stainless steel
  • handle orientation to the inlet and out let fittings can be changed by rotating the clamp ring to  12 different positions.
  • handle movement is up and down with pump sitting on horizontal surface, to convert to back and forth movement order the Vertical Handle option.
  • for rough use applications order the heavy duty aluminum clamp ring.
  • male garden hose thread allows for the easy connection of the hook up hose and a garden hose, BUT for transferring a large volume of water you must use at least a 1" inside diameter hose, garden hose is much too small which results in hard pumping with very low volume.
  • includes a 3 foot priming hose: 3/4" I.D. flexible braided PVC with a female garden hose fitting crimped on each end. NOTE - 1 foot hose shown in photo
  • to also use this pump as back up manual sump pump, order 2 sump pump hose adapters. Most hardware stores carry a 1 1/4" sump pump hose kit (24 feet of hose) which will connect to this pump using these adapters. This hose can be easily cut in order to attach one piece to the inlet and one piece to the outlet on the Guzzler. The pump can be permanently mounted to a horizontal or vertical surface, or attached to a small piece of wood for portability (4 screw holes provided).
  • NOTE - for drinking water applications the FDA approved model G2400 is recommended, contact us for details.

 

About Rintoul's Hand Pumps

Established in 1983, Rintoul's Hand Pumps has provided quality pump products across the globe for many applications. We take pride in supplying the best products, and are available for all your questions!

Where are we?

Rintoul's Hand Pumps

519-371-3500

285 8th St E
Owen Sound, ON N4K 1L2
Canada

©2024 RINTOUL'S HAND PUMPS. All Rights Reserved. Designed By NewMedia Designs

Search